Oil Check Valves

Oil Check Valve‍‍‍s are part of an oil lubrication system to help prevent leakage and back-flow of lubricant.

The valve acts as a gateway allowing lubricant to flow in only one direction, protecting against old lubricant and contaminants entering back into the lubrication lines. In situations where our units are mounted upside down, an oil-check valve is especially required.  All of our single-point lubricators come with an oil-check valve.

All of our automatic lubricators can be filled with oil, but our TITAN OILER was engineered specifically for oil applications and has a 1.4L reservoir, pushes oil at up to 2000psi and can be remote mounted up to 60m away from a lube point!



Control Options

Battery & Power Options

Mounting Plates & Brackets

Distribution Blocks

Weather Caps

Oil Lubrication Brushes

Open Gear Applicator

Tubing and Fittings

Low Level Lubricant Sensor

Oil Check Valves

Adapters, Tubing & Fittings

Oil Check Valves

All of our TITAN OILER units come with built-in oil check valves, but some units may need additional check valves added to ensure that the oil does not back-feed into the unit.‍‍‍

ATS Electro-Lube is the originial manufacturer 
of automatic lubrication systems.  They feature the Electro-luber a 
single-point luber and also a wide range of motor driven lubers that 
dispense grease and oil in any environment.

Home > Accessories > Oil Check Valves

The ATS 
Electro-Lube Ultimate Luber is a powerful motor-driven unit
 is a multi-point lubricator that can reach and maintain high pressures 
through long lines.  Our many accessories are great to use with the 


7388 Wilson Avenue, Delta, B.C. V4G 1H3 Canada

ATS Electro-Lube produced the original Electro-Luber and has grown to world-wide recognition for their continued dedication to quality and durability in all industries.‍‍‍

A world-leader in automatic lubrication solutions

© ‍‍‍2016 ATS Electro-Lube Int’l Inc.‍‍‍‍‍‍