LUBRICATION PRODUCTS
A.T.S. LUBRICATION UNITS ARE DESIGNED FOR EVERY INDUSTRY
A.T.S. Electro-Lube manufactures the industry’s best performing automatic lubricating equipment.
Our lube solutions are reliable, safe, and labour-saving alternatives to manual lubrication. They can provide up to 2 years of continuous lubrication and can be mounted nearly anywhere, including remotely.
Up to 50 psi
60cc, 125cc, 250cc, 475cc
Safe electro-chemical bellow
Safe for use in all environments
Up to 200 psi
125cc, 250cc
Replaceable grease cartridge
Up to 2 multi-point
Up to 1000 psi
60cc, 125cc, 250cc, 475cc
Motor-driven and refillable
Up to 12 multi-point
Up to 1000 psi
Single or double grease cartridge
Remote mount up to 6m
Up to 12 multi-point
Up to 2000 psi
1.4L reservoir
Remote mount up to 60m
Up to 12 multi-point
CHOOSE YOUR LUBER
Answer some questions below to see what A.T.S. lubrication unit best suits your specific requirements. From there, read more about your luber series—all designed to work for every industry and application!
For explosive and hazardous environments, select the ELECTRO series:
ELECTRO-LUBER™—Approved for all explosive environments and hazardous areas, and the most widely-used single point unit with extensive safety ratings. Certified Intrinsically Safe for Class 1, Groups A, B, C, D, E, F, and G. Also certified by MSHA and Energy, Mines Canada for use in mining. ATEX certified units are also available.
For extremely cold environments, select the ELECTRO series
ELECTRO-LUBER™—Temperature range: -40F to +132D (-40˚C to +55˚C). Note: All A.T.S. lubers are able to go down to –20˚C with an appropriate low-temp lubricant. Low-temp lubricants must be used at low temperatures.
For more than 50psi, select any of the following series:
JACK LUBER™ | ULTIMATE-LUBER™ | TITAN CL & TITAN II | TITAN OILER
For any requirements up to 50psi, select the ELECTRO series:
ELECTRO-LUBER™—Delivers consistent, precisely controlled lubrication up to 50psi. May be remote mounted up to 1m.
For multiple lube-points, select the ULTIMATE or TITAN series
ULTIMATE-LUBER™ | TITAN CL & TITAN II
ULTIMATE-LUBER™—a powerful motor-driven automatic lubricator, performing multi-point lubrication up to 12 points. This unit pushes lubricant over 1000 psi through long feed lines to progressive distributors, activating at specified intervals.
TITAN CL & TITAN II—based on ULTIMATE LUBER™ technology, units push grease over 1000psi through up to 12 points, refillable using standard grease cartridges.
For a single lube-point, select the ELECTRO or JACK series
(Note: all A.T.S. lubrication units connect to at least one lube-point)
ELECTRO-LUBER™—a versatile automatic unit that lubricates a single point and can be remote mounted as far as 1m.
JACK LUBER™—provides 200psi, remote mounting up to 6m and takes one of our house-made replaceable cartridges.
For grease lubrication, select ELECTRO, JACK, or ULTIMATE series
For oil lubrication, select ELECTRO or TITAN-OILER
ELECTRO-LUBER™—virtually any lubricant can be used! Order this unit with an oil restrictor to effectively push oil. This setup is a convenient choice for extreme environments that the oiler may not be able to handle.
TITAN OILER—pushing over 2000psi, TITAN OILER is the world’s most powerful single- or multi-point automatic oiler. It can distribute lubrication up to 12 points through our distribution block, and remote mount up to 60m.
Questions? Visit our FAQ, Request a Quote, or call TOLL-FREE 1-800-663-8141 — we’re here to help!
SELECT CRITERIA FOR SPECIFIC LUBER PRODUCT REQUIREMENTS
A.T.S. Electro-Lube manufactures the industry’s best performing automatic lubricating equipment.
Our lube solutions are reliable, safe, and labour-saving alternatives to manual lubrication. They can provide up to 2 years of continuous lubrication and can be mounted nearly anywhere, including remotely.
