Size & Dimensions:

  • Jumbo-Luber: 6-3/4" high X 4-3/4" dia.
  • Budget-Luber: 6-1/8" high X 4" dia.
  • Mini-Luber: 5-5/8" high X 3-1/8" dia.
  • Micro-Luber: 4-7/8" high X 3-1/8" dia.

Request a quote today on ATS auto-lubers for your application, or contact us for additional information.

Features & Specifications

  • Self-Contained, stand-alone, single-point auto-luber
  • Continuous lubrication using safe, inert, nitrogen gas. Continuous lubrication of bearings prevents intrusion of foreign matter, slows oxidation, aids in dissipating heat and ensures a constant supply of fresh lubricant
  • Available in 4 sizes: 2, 4, 8, or 16 oz. (60, 125, 250 or 475cc)
  • Pressures up to 50psi
  • Approved for all explosive environments. Certified Intrinsically Safe for Class 1, Groups A, B, C, D, E, F, and G. Also certified by MSHA and Energy, Mines Canada for use in mining. ATEX certified units also available.
  • Multiple settings to empty from 15 days to 1 year
  • Suitable for indoor/outdoor use
  • May be remote mounted to 3' (1m)
  • Filled with any customer-specified lubricant
  • Temperature Range: -40F to +132F (-40C to +55C).
    • NOTE: Low-temp lubricants must be used at low temperatures

The classic ELECTRO-LUBER series was developed in 1982. The ELECTRO-LUBER is a single point automatic lubricator that uses an electro-chemical reactor cell which converts electrical energy into safe, inert nitrogen gas. The gas is contained in a hermetically sealed bellow-type gas chamber. ATS Electro-Lube was the first company to use this self-contained auto luber technology and sets the industry standard. As the gas is produced, internal pressure builds up in the bellows and is applied against the orange piston. The piston then forces the lubricant out of the cylinder and into the point of lubrication. The unit can empty from between 15 days to one year, depending on the setting of the simple user-programmable DIP switch. This selection can be changed or turned off at any time.

The Electro-Luber series can be filled with any lubricant and used in virtually every work environment. Our lubers are intrinsically safe and approved for all explosive areas. They are also certified by MSHA for use in mines. They can be filled with food-safe lubricant and will work underwater up to 30' (10m) deep!

Our units are simple to use, effective and drastically reduce the risk of bearing failure by ensuring that your machines are continuously lubricated with the right amount of lubricant at the correct time.  ATS'‍‍‍ Electro-Lubers have been saving clients time and money for over 3 decades!

  • Maximum 50 psi
  • -40C to +55C operating temperature
  • Waterproof to 10m
  • Remote mounting & remote control options
  • ATEX/UL certified (all explosive zones)
  • Use with ANY lubricant
  • Available in 60, 125, 250 or 475cc
  • Recall rate less than 0.001%


  • Consistently precisely controlled lubrication
  • Virtually ANY lubricant can be used
  • Safe for use in all conditions, including food-safe and all hazardous areas.
  • Intrinsically safe, ATEX/UL certified
  • Dispensing of lubricant is not affected by ambient temperature or fluctuations (within lubricant and luber parameters)
  • Reduces workplace accidents by safely working in dangerous or hard to reach areas
  • Can be remote mounted for safety and convenience
  • Extends equipment life by reliably lubricating
  • Prevents lubricant contamination
  • Reduces maintenance costs
  • Eliminates downtime for costly repairs
  • Simple installation without tools
  • The original, most trusted units on the market!

Quad-Fold Product Brochure.pdf

Sell Sheet ELECTRO Luber.pdf

ATS Electro-Lube is the originial manufacturer 
of automatic lubrication systems.  They feature the Electro-luber a 
single-point luber and also a wide range of motor driven lubers that 
dispense grease and oil in any environment.


Home > Lubrication Products > ELECTRO-Luber

Lubrication Products




JACK Luber


T.T. Thermal Lube

ELECTRO Downloads

In Conformity to European Norms Ex nL IIC T3 II 3 G

Class 1, Groups A,B,C,D; Class II, Groups E,F,G; Class III, Intrinsic


ELECTRO at work

ELECTRO Mini automatic lubricators fitted to fan bearings.

ELECTRO Budget on a roller at a pulp and paper mill.

ELECTRO Mini installed on a bearing

The ATS 
Electro-Lube Ultimate Luber is a powerful motor-driven unit
 is a multi-point lubricator that can reach and maintain high pressures 
through long lines.  Our many accessories are great to use with the 


7388 Wilson Avenue, Delta, B.C. V4G 1H3 Canada

ATS Electro-Lube produced the original Electro-Luber and has grown to world-wide recognition for their continued dedication to quality and durability in all industries.

A world-leader in automatic lubrication solutions

© 2016 ATS Electro-Lube Int’l Inc.

info@atselectrolube.com  Toll Free: 1-800-663-8141

Installation Sheet: ELECTRO LUBER.pdf