We manufacture all of our units in-house in Vancouver, BC Canada. Because of this, we use NPT (National Pipe Thread) sizing. For our North American market, adapters are rarely needed. For our clients all around the world, there are a variety of reducers and fittings that we sell to help our unit fit your application. You may also be interested in earning about tubing connections for our luber series.
Firstly, you need to measure the size of the lubrication threading that your machinery or application has. The best way to do this is to refer to the manufacturers literature. If you do not have this, you can manually measure by removing the grease nipple and using an accurate ruler. From there you can assess your own needs or contact us if you have any doubts.
ULTIMATE, TITAN, JACK
Tubing and hoses are a large part of efficient automatic lubrication. Most of our lubricators are powerful enough to feed multiple lube points and be remote mounted; both require extra tubing to connect the extended feed lines.
There are large advantages to remote mounting but the foremost benefit is the safety of workers; by installing the unit outside of the dangerous working zone, maintenance can be done without ever having be in danger of the working machines.
Increase safety of workers by installing units outside of hazardous areas
Locate units in convenient areas for maintenance.
Minimize downtime by keeping machinery running while lubers are refilled.
For high vibration areas, remote mounting is an effective solution for continuous lubrication.
Service up to 12 lube points with a single unit via distribution block
Battery & Power Options
Mounting Plates & Brackets
Oil Lubrication Brushes
Oil Check Valves
Low Level Lubricant Sensor
ATS Electro-Lube produced the original Electro-Luber and has grown to world-wide recognition for their continued dedication to quality and durability in all industries.
A world-leader in automatic lubrication solutions
© 2016 ATS Electro-Lube Int’l Inc.