ELECTRO-LUBER™ is the most widely-used single point unit with extensive safety ratings. This unit can be used underwater, in mines, and other hazardous areas.
JACK LUBER™ is a cost-efficient and powerful unit, pushing lubricant up to 200psi. It operates under extreme temperatures (-20°C – +60°C).
ULTIMATE-LUBER™ is a powerful lubricator, pushing over 1000psi and servicing up to 12 lube points. With high pressure, this unit can run a 10m feed line.
TITAN CL & TITAN II can push over 1000psi through up to 12 points, and uses convenient grease cartridges.
TITAN OILER is an extremely powerful unit, pushing over 2000psi. With extremely high pressure, this unit can feed 12 points with long feed lines.
Combine our progressive distribution blocks with auto lubricators to provide a complete, self-contained multi-point lubrication system.
If you require multiple points to be lubricated:
All ports in a distribution block must be used. If 6 points require lubrication, a 6 port block is required. Simply plugging a port or ports will prevent the progressive spindle from shuttling and will stop operation.
If you require fewer points to be lubricated:
Two ports may be linked together to create a single outlet port. This process can be duplicated until the outlets are reduced to the desired number. Standard plumbing fittings can be used to “T” two ports together. Special port fittings are also available.
Note: when two outlet ports are joined together, the lubrication point being fed by this combined port will receive twice as much grease as a point connected to a standard, non-joined outlet port. However, extra ports can be fed back into the luber or into another container. This will ensure that all lube points receive the desired quantities of grease.
Get the latest news, tips, and product updates directly into your inbox.
We don’t share your info and you can unsubscribe at anytime if you aren’t getting value from our occasional email updates.