ATS Electrolube

MD2000 TITAN CL™
Automatic Lubricator

Specifications
Temperature Range 5ºF. to 132ºF. (-15ºC. to 55ºC.)
(NOTE: Low Temp lubricant must be
used at low temperatures)
Size


Multi-Point Assembly
24"H x 6 1/4"W x 8"D
(61cm H x 16cm W x 20cm D)

Single-Point Assembly
18"H x 6 1/4"W x 8"D
(46cm H x 16cm W x 20cm D)

 
Downloads
Sales Brochure

General information on product applications, accessories and specifications.

PDF Titan Series 1.1 MB
ATS Electrolube
ATS Electrolube
Information

The Electro-Luber MD 2000 TITAN CL™ Cartridge Luber is a powerful, motor-driven automatic lubricator which is refillable by simply replacing a standard grease cartridge. Its microprocessor controlled, energy efficient motor delivers grease to a fixed displacement pump which produces pressures up to 900psi. This strength allows the TITAN CL™ to drive lubricant through long feed lines, and to cycle progressive distributors to feed several bearings consecutively. When a dispensing cycle is selected, the unit will activate at defined intervals. At each interval, the TITAN CL™ dispenses approximately 1.25cc of grease. Neither temperature nor altitude will affect the output.

 
Features
  • Most powerful lubricator on the market. Produces up to 900psi which enables it to service single-point applications up to 30’ away (9 m.) and multi-point applications up to 20’ (6 m.) away.
  • Available with replaceable battery packs or optional external power sources. (AC and DC)
  • Optional Remote Control available to connect to customer supplied equipment or machinery (eg: PLC, Contactors, Relays)
  • Multiple settings from 15 days to 2 years.
  • Single or Multi-Point configuration
  • Refillable using a standard grease cartridge (no other tools needed)
  • Able to service multiple lube points using a progressive distribution block
  • Unit is mounted on an easy to install mounting plate
  • Suitable for indoor/outdoor use
  • LED operation and warning indicators:
    (1-red, 1-green, 1-blue)

    1 GREEN flash every 20 seconds
    - normal operation

    1 GREEN flash every second (approx.)
    - unit is dispensing grease

    1 RED flash every 20 seconds
    - limit switch error (unit operating in failsafe (timed   dispense) mode)

    2 RED flashes every 20 seconds
    - Low Battery warning

    1 BLUE flash every 20 seconds
    - low grease level
      (grease cartridge needs to be replaced)
ATS Electrolube

Copyright 2006 A.T.S. Electro-Lube International Inc. All Rights Reserved.
Homepage | About Us | Products | Downloads | Applications | Contacts | Email Us | Privacy Policy

Phone: (800) 663-8141
Fax: (800) 663-8140